• 70 Ohm Cloud 9 Heater Element with Thermal Fuse

70 Ohm replacement heater element with series wired thermal fuse for Cloud 9 Standard and Wide models that originally had a 70ohm heater fitted.

This heater element measures 15mm x 70mm.  70 ohms is a nominal value, the elements can range from approx 65 ohms to approx 75 ohms.


For models with a thermal fuse integrated into an element wire it's more likely than not that it's just a blown fuse, in that

case it's best to splice a new fuse into the wire rather than need to mess about balancing the temperature on a new

element. Elements with integrated fuses are pot luck as far as resistance goes so rarely will match what is being replaced

and you absolutely WILL need to re-tune the temperature. If you are only doing one fuse expect the other one to fail

sometime soon.


Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

70 Ohm Cloud 9 Heater Element with Thermal Fuse

  • Brand: Compatible Part
  • Product Code: c9_70ohm_fuse
  • Availability: In Stock
  • $23.00

  • Ex Tax: $20.00

Related Products

Cloud 9 Thermal Fuse

Cloud 9 Thermal Fuse

A replacement thermal fuse suitable for mounting behind the plate on Cloud 9 Standard, Wide and T..

$23.00 Ex Tax: $20.00

160 Ohm Cloud 9 Heater Element with Thermal Fuse

160 Ohm Cloud 9 Heater Element with Thermal Fuse

160 Ohm replacement heater element with series wired thermal fuse for Cloud 9 Standard and Wi..

$17.00 Ex Tax: $14.78